IRIScanTM Pro 3 Wifi User Guide Regulatory model: IRIScanTM Pro 3 Wifi manual-en-250-0827-E-iriscanpro3wifi-v100
1-2 2. Please unpack the packing carefully, and check the contents against the checklist. If any items are missing or damaged, please contact your
User Guide 1-3 Item Name Description 8 Wifi Indicator Light Indicate the Wifi status. 9 Feed tray This tray is used for feeding documents. Open i
1-4 1.4 Rear View Item Name Description 1 Plastic card feeder Used to insert and hold a business card or a plastic card. 2 Memory card slot
User Guide 1-5 1.6 LCD Display Item Name Description 1 Battery status Indicates the power status of the battery. 2 PC/Scan count/Error Ind
User Guide 2-1 2. Installation 2.1 Precautions Keep the product out of direct sunlight. Direct exposure to the sun or excessive heat may caus
2-2 3. Open the battery cover.
User Guide 2-3 4. Load the battery into the battery container. Make sure the battery is loaded with the correct polarity. Note the copper strips o
2-4 2.3.2 Via the USB Power Adapter 1. Turn off the scanner. 2. Connect the micro USB connector to the USB port of the scanner. 3. Connect the
User Guide 2-5 2.4 Install a SD Card To scan in SD (Scan to SD) mode, the scanner’s built-in storage disk has approximately 128MB of space that c
2-6 2.5 Install the Feed Extension Plate 1. Open the feed tray. 2. Open the feed extension plate.
ii Trademarks Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows, Windows XP, Windows Vista, Windows 7 and Windows 8 are e
User Guide 2-7 3. Raise the document guides and adjust them to the size of your documents.
2-8 2.6 Install the Software The IRIScan Pro 3 Wifi comes with the software packages Readiris Corporate 14 (PC and Mac), Cardiris Corporate 5 (PC)
User Guide 2-9 Contents of the setup menu: IRIScan Pro Wifi: install the driver to use the scanner in PC mode, and scan directly from Readiris a
2-10 2.6.5 Connect to a Computer 1. Connect the micro USB port of the USB cable to the USB port of your scanner. 2. Connect the other end to
User Guide 2-11 2.7 Suitable and Unsuitable Original Types Suitable Original Types The scanner used with the feeder dock is designed to obtain the
2-12 Document Feeding 1. Load the stack of document FACE DOWN with the top of the pages pointing into the feeder. Up to 8 pages of plain paper c
User Guide 3-1 3. Operation in Easy (SD) Mode 3.1 Power on the Scanner Turn the Power Switch to the [ON] position to turn on the scanner. The LE
3-2 3.3 Choose Your Desired Scan Settings After the scanner is turned on, the LCD displays the default scan settings, Resolution: 300 dpi, Col
User Guide 3-3 3.4 Start a Scan Press the [Scan] button to start a scan and the paper will feed through the scanner.
3-4 3.5 Scan a Card 1. Make sure the feeder cover and paper tray are closed as shown. 2. Insert your plastic card FACE DOWN from the back
User Guide iii FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
User Guide 3-5 3.6 Scan Dark Pictures The scanner has a built-in cropping function that automatically detects and crops dark edges and dark areas
3-6 3.7 Power off the Scanner When your scanning job is completed, move the Power switch to the [OFF] position to turn off the scanner. The LCD
User Guide 3-7 3.8.1 Connect With Windows XP or Later 1. Turn on the scanner. 2. Insert the memory card containing your scanned images into the
3-8 2. Connect your IRIScan scanner to your computer and power on the scanner. 3. Readiris opens the scanner memory folder. Select the documents t
User Guide 3-9 Tip: to load other images at a later time, click the down arrow next to Scan, and select Load. Now click the Load button to load image
3-10 3. When the Safe to Remove Hardware message appears, you can safely remove the scanner’s USB cable. Disconnect the Scanner from a Macintosh
User Guide 4-1 4. Operation in Advanced (PC) Mode – Windows only Attention: in order to use the scanner in Advanced (PC) mode, you must have inst
4-2 5. Click Scanner Model. 6. Select IRIScan Pro 3 Wifi. You can now configure the scanner settings in the Readiris dialog box. 7. Or select IR
User Guide 4-3 The following procedure describes how to start a simple scan. If there is an error, please review the preceding section to check if th
4-4 sides of your document. 7. Click OK to quit the Scanner Properties dialog box. (To learn more details about the Scanner Properties dialog box,
iv IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled enviro
User Guide 4-5 1. Tab Options Choice: Image, Compression, Color Dropout, Paper, Preview, Options, Settings, Information. 2. Image Selection Box
User Guide 5-1 5. Access the scanned images through Wifi (SD Mode) Using the scanner’s Wifi connection (available only for the SD mode, you can wi
5-2 iPhone & iPad users: Go to Settings→Wifi→ select the network ID (I.R.I.S. -XXXX). No password is required; wait for the check mark to con
User Guide 5-3 6. Click or tap on any image to view in full screen. 5.2 Use Options under Image Thumbnails Click the Setup button to prompt t
5-4 iPhone/iPad Devices: 1. Open Safari Browser, the I.R.I.S. PhotoView page will be displayed. 2. Select the photo(s) to open. 3. A new brows
User Guide 5-5 5.3 Reset Login Settings Should you forget your login user name and password, you can press the Reset button for 10 seconds to resum
User Guide 6-1 6. Enhance Your Images with the Scanner Properties Dialog Box (PC Mode) By switching to the “PC” mode, installing the scanner dri
6-2 6.1 Buttons on the Scanner Properties Dialog Box The buttons on the Scanner Properties dialog box Note: The command buttons in the bottom
User Guide 6-3 The following table shows the default settings: Tab name Default settings Image Image:Front B&W Binarization:Dynamic Threshold
6-4 6.2 The Image Tab The Image tab allows you to choose the front side and (or) the rear side of your document, the type of image, and to set se
User Guide v Warning and Precautions of the lithium-ion battery Warning: Danger warning to prevent the possibility of the battery from leaking, h
User Guide 6-5 6.2.2 Other Image Options Binarization This is the process of converting a grayscale or color image to a bi-tonal image. There are
6-6 Brightness Adjusts the lightness or darkness of an image. The higher the value, the brighter the image. Drag the slider to the right or left t
User Guide 6-7 Resolution A good control of the resolution results a good detail of an image that scans. The resolution is measured by dots per inc
6-8 6.2.3 Scanning Color Images The following options are available for scanning color images. Brightness Contrast Resolution Invert
User Guide 6-9 6.2.6 Editing Profiles The Scanner Properties dialog box allows you to change and save your frequently used scan settings into a p
6-10 To delete a profile, 1. From the Image tab dialog box, click “Profiles” to prompt the Edit Your Profile dialog box. 2. Choose the profil
User Guide 6-11 6.3 The Compression Tab The Compression tab allows you to compress your scanned image and choose the level of compression. Bi-tonal
6-12 6.4 The Color Dropout Tab 6.4.1 Color Dropout Selection Color Dropout tab allows you to drop either of the red, blue, or green color in you
User Guide 6-13 6.5 The Paper Tab The Paper tab allows you to define values relating to image output (i.e., Auto Crop or not, Scan Area, OverSca
6-14 Relative to Document This option allows you to crop different areas on your documents and deliver these images in B&W, Gray, or Color sep
vi Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose the battery according to local regulations. Never plac
User Guide 6-15 3. Click the Preview tab to display the Preview window. A black rectangular box appears to indicate the max. scan size your have ju
6-16 The entire document in B&W The relative area in color
User Guide 6-17 6.5.2 Other Paper Selection Scan Area Choose your desired paper size with the drop-down list box. Or you may select a custom pape
6-18 6.6 The Preview Tab The Preview tab allows you to preview (a low-resolution scan) your image before final scan. This preview image lets you
User Guide 6-19 6.7 The Options Tab The Options tab allows you to set following additional image processing settings. The Option tab dialog box
6-20 Background Setting This option allows you to set your scan background. Choice: White Background, Black Background. Note: For a sheet-fed scan
User Guide 6-21 6.8 The Setting Tab The Setting tab allows you to set the following settings: The Setting tab dialog box Cache Mode: None, Page
6-22 6.9 The Information Tab The Information tab displays the following system and scanner information. The Information tab dialog box The “
User Guide 7-1 7. Maintenance 7.1 Clean the Scanner Glass, Separation Pad and Rollers If the scanned images contain streaks or scanned documents
7-2 3. Wipe the separation pad, rollers and the glass with the included cleaning cloth. Note: Adding some isopropyl alcohol (95%) on the
User Guide vii Table of Contents 1. Overview ... 1
User Guide 7-3 7.2 Calibrate the Scanner Calibrate only if the scanned image looks fuzzy, the color looks abnormal (e.g., darker than normal), afte
7-4 Notes: If the calibration process failed, the red led flashes and [E19] is displayed on the screen. Power off the scanner and repeat the cali
User Guide 7-5 7.3 Replace the Feed Roller The feed roller and separation pad inside the scanner wear with scanning. If the feed roller and separa
7-6 3. Open the roller cover.
User Guide 7-7 4. Slide the feed rollers to the right. 5. Remove the feed rollers. 6. Attach the feed rollers. Insert the left end of the
7-8 7.4 Replace the Separation Pad To replace the Separation Pad, 1. Open the feed tray. 2. Open the feeder cover. 3. Press two arms of
User Guide 7-9 4. Hold two arms of the separation pad with two fingers and attach the new separation pad to the scanner. 5. Close the feeder
User Guide 8-1 8. Troubleshooting 8.1 Clear a paper jam In the event of a paper jam, follow the procedures below to remove the paper: 1. Gen
8-2 8.2 Error Conditions If there is error during scanning, the LED light will be flashing in red color and error codes will be displayed. Refer
User Guide 8-3 8.3 Frequently asked questions and answers General: Q: Paper becomes jammed or multi-fed. A: 1. Flatten the corners and edges of
viii 5. Access the scanned images through Wifi (SD Mode) ... 5-1 5.1 Access the Scanned Image through Wifi ...
8-4 Q: Why there are strange lines on the scanned document? A: Please check the following: 1. Are there scratches on the original or is the orig
User Guide 8-5 Wifi Mode: Q: Why can’t I see the Scanner’s Wifi Network ID [SSID]? A: Make sure you have pressed the [Wifi] button and the Wifi ic
8-6 Q: Why can’t I see my recently scanned images? A: Click the “Refresh” button of your browser or delete all browser session cache. Q: Why ar
User Guide 8-7 8.4 Technical Service Before contact I.R.I.S., please prepare the following information: Scanner serial & revision number
User Guide 9-1 9. Specifications Specifications are subject to change without notice. General Specifications: Item Description Regulatory mode
9-2 Wifi Specifications: Standard IEEE 802.11 b/g/n standards compliant Wireless LAN 1T1R Mode Frequency Range 2.400 ~ 2.4835GHz ( subject to
User Guide 1-1 1. Overview 1.1 Introduction Congratulations on your purchase of the mobile scanner. This scanner provides you flexib
Kommentare zu diesen Handbüchern